在conoha买的vps，远程服务器的时候出现了错误，弄了好久，没有解决，还望大家能帮忙分析一下：
执行ssh -vvv serverip命令，下面是详细信息：
OpenSSH_6.6.1, OpenSSL 1.0.1f 6 Jan 2014
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to serverip port 22.
debug1: Connection established.
debug1: identity file /home/killer/.ssh/id_rsa type -1
debug1: identity file /home/killer/.ssh/id_rsa-cert type -1
debug1: identity file /home/killer/.ssh/id_dsa type -1
debug1: identity file /home/killer/.ssh/id_dsa-cert type -1
debug1: identity file /home/killer/.ssh/id_ecdsa type -1
debug1: identity file /home/killer/.ssh/id_ecdsa-cert type -1
debug1: identity file /home/killer/.ssh/id_ed25519 type -1
debug1: identity file /home/killer/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.6.1p1 Ubuntu-2ubuntu2
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH* compat 0x04000000
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host serverip from file "/home/killer/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/killer/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: [email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: setup hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: setup hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: RSA 73:fd:66:03:e5:72:75:35:71:e7:f9:dc:fa:46:38:b6
debug3: load_hostkeys: loading entries for host "console1001.cnode.jp" from file "/home/killer/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/killer/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: load_hostkeys: loading entries for host "203.189.102.197" from file "/home/killer/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/killer/.ssh/known_hosts:2
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'console1001.cnode.jp' is known and matches the RSA host key.
debug1: Found key in /home/killer/.ssh/known_hosts:1
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/killer/.ssh/id_rsa ((nil)),
debug2: key: /home/killer/.ssh/id_dsa ((nil)),
debug2: key: /home/killer/.ssh/id_ecdsa ((nil)),
debug2: key: /home/killer/.ssh/id_ed25519 ((nil)),
debug1: Authentications that can continue: keyboard-interactive
debug3: start over, passed a different list keyboard-interactive
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: Authentications that can continue: keyboard-interactive
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (keyboard-interactive).

以上是错误日志，下面贴一下配置文件sshd_config：

$OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $

This is the sshd server system-wide configuration file. See

sshd_config(5) for more information.

This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin

The strategy used for options in the default sshd_config shipped with

OpenSSH is to specify options with their default value where

possible, but leave them commented. Uncommented options change a

default value.

Port 22

AddressFamily any

ListenAddress 0.0.0.0

ListenAddress ::

Disable legacy (protocol version 1) support in the server for new

installations. In future the default will change to require explicit

activation of protocol 1

Protocol 2

HostKey for protocol version 1

HostKey /etc/ssh/ssh_host_key

HostKeys for protocol version 2

HostKey /etc/ssh/ssh_host_rsa_key

HostKey /etc/ssh/ssh_host_dsa_key

Lifetime and size of ephemeral version 1 server key

KeyRegenerationInterval 1h

ServerKeyBits 1024

Logging

obsoletes QuietMode and FascistLogging

SyslogFacility AUTH

SyslogFacility AUTHPRIV

LogLevel INFO

Authentication:

LoginGraceTime 2m

PermitRootLogin yes

StrictModes yes

MaxAuthTries 6

MaxSessions 10

RSAAuthentication yes

PubkeyAuthentication yes

AuthorizedKeysFile .ssh/authorized_keys

AuthorizedKeysCommand none

AuthorizedKeysCommandRunAs nobody

For this to work you will also need host keys in /etc/ssh/ssh_known_hosts

RhostsRSAAuthentication no

similar for protocol version 2

HostbasedAuthentication no

Change to yes if you don't trust ~/.ssh/known_hosts for

RhostsRSAAuthentication and HostbasedAuthentication

IgnoreUserKnownHosts no

Don't read the user's ~/.rhosts and ~/.shosts files

IgnoreRhosts yes

To disable tunneled clear text passwords, change to no here!

PasswordAuthentication yes

PermitEmptyPasswords no

PasswordAuthentication yes

Change to no to disable s/key passwords

ChallengeResponseAuthentication yes

ChallengeResponseAuthentication no

Kerberos options

KerberosAuthentication no

KerberosOrLocalPasswd yes

KerberosTicketCleanup yes

KerberosGetAFSToken no

KerberosUseKuserok yes

GSSAPI options

GSSAPIAuthentication no

GSSAPIAuthentication yes

GSSAPICleanupCredentials yes

GSSAPICleanupCredentials yes

GSSAPIStrictAcceptorCheck yes

GSSAPIKeyExchange no

Set this to 'yes' to enable PAM authentication, account processing,

and session processing. If this is enabled, PAM authentication will

be allowed through the ChallengeResponseAuthentication and

PasswordAuthentication. Depending on your PAM configuration,

PAM authentication via ChallengeResponseAuthentication may bypass

the setting of "PermitRootLogin without-password".

If you just want the PAM account and session checks to run without

PAM authentication, then enable this but set PasswordAuthentication

and ChallengeResponseAuthentication to 'no'.

UsePAM no

UsePAM yes

Accept locale-related environment variables

AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS

AllowAgentForwarding yes

AllowTcpForwarding yes

GatewayPorts no

X11Forwarding no

X11Forwarding yes

X11DisplayOffset 10

X11UseLocalhost yes

PrintMotd yes

PrintLastLog yes

TCPKeepAlive yes

UseLogin no

UsePrivilegeSeparation yes

PermitUserEnvironment no

Compression delayed

ClientAliveInterval 0

ClientAliveCountMax 3

ShowPatchLevel no

UseDNS no

PidFile /var/run/sshd.pid

MaxStartups 10:30:100

PermitTunnel no

ChrootDirectory none

no default banner path

Banner none

override default of no subsystems

Subsystem sftp /usr/libexec/openssh/sftp-server

Example of overriding settings on a per-user basis

Match User anoncvs

X11Forwarding no

AllowTcpForwarding no

ForceCommand cvs server